Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Brookings, SD

Fleet Washing in Brookings, SD

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard. Typical cost $150-$800.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Fleet Washing in Brookings, SD brings it back, usually in a single visit.

The right method for the job

Mobile washCleaning method

Is it time for fleet washing?

  • Dirty company vehicles representing your brand
  • Road salt build-up in winter
  • Equipment caked with mud

What causes the dirt and stains

  • Road grime and salt
  • Job-site mud
  • Exhaust soot

Safe steps for homeowners

  • Rinse salt off undercarriages often in winter

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Wash water runoff at your yard
  • Damage to decals and seals

How we handle fleet washing

  1. Schedule at your location
  2. Pre-treat
  3. Wash and rinse
  4. Detail wheels and trim
  5. Log the vehicles washed

How much does fleet washing cost?

$150-$800Typical range per visit for a small fleet
Depends on fleet sizeTypical time on site
Weekly to monthlyRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Fleet Washing in Brookings, SD

Commercial properties in South Dakota usually get a big spring clean of sidewalks, entrances and parking areas to remove sand, salt and winter litter, and many schedule a second visit in the fall.

Crews serve all of Brookings (ZIP codes 57006 and 57007), plus Flandreau (20.7 mi), Madison (26.3 mi), Pipestone, MN (32.1 mi) and Dell Rapids (33.8 mi). Call (555) 010-0000 for a free quote in Brookings.

Fleet Washing: frequently asked questions

How much does fleet washing cost in Brookings, SD?

Fleet Washing typically costs $150-$800 per visit for a small fleet, and usually takes Depends on fleet size. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for fleet washing?

Fleet Washing is usually done with mobile wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is fleet washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule fleet washing?

Weekly to monthly. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Brookings, SD

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Patio Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Efflorescence Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$600

Pressure Washing for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$600

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Graffiti Removal

Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface.

Typical $200-$800

Rust Stain Removal for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $150-$500

Pre-Paint Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$600

House Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$700

Pool Deck Cleaning

Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Brookings, SD. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote